FLUSH DOORS

New

NAVAIR Wooden Flush doors are consisted of core with low density wood perimeter system in the form of stiles and rails was adder that held the blocks in place provide screw-holding power from edge. A ply woods placed over the entire core and edge to create and engineer door.

Add to wishlist

More info

Another feature is replacement to the stave core and an ultra-low density particle board core. It is more reliable and stable. Our flush doors are fashioned around a core, resulting in less sound transmission and improved over all mechanical & physical properties. Unlike other door systems, wood flush door arrive at the job site ready to hand.

“DOOR COLLECTION IS VERY HIGH QUALITY & HAVE A GOOD FINISHING”

.

Specification Sheet

  1. Application                         Passage Door
  2. Door Width                         Up to 1200mm
  3. Door Height                        Up to 2400mm
  4. Door Thickness                   30mm, 32mm, 35mm, 38mm, 42mm, 45mm
  5. Face                                   Plywood : 3mm thick-Grade-MR, BWR

                                                    Veneer : 3mm thick-Natural & Recon

                                                    Laminate : 0.8mm & 1mm thick

  1. Available Cores                   Hardwood, Pine Wood, Softwood
  2. Adhesive                            Fevicol (D3)
  3. Stiles                                 55mm wide-soid, two piece or securely bonded to the core
  4. Rail                                    55mm wide-solid tree piece or securely bonded to the core
  5. Lipping                               As per requirement
  6. Finishing Options                 Both Pain and Stain available
  7. Surface                               Both Smooth & Textured available
  8. Machining                           Complete factory machining available

* Particle Board Infill : Only Available in 35 & 38 mm thick Doors

Reviews

No customer comments for the moment.

Write a review

FLUSH DOORS

FLUSH DOORS

NAVAIR Wooden Flush doors are consisted of core with low density wood perimeter system in the form of stiles and rails was adder that held the blocks in place provide screw-holding power from edge. A ply woods placed over the entire core and edge to create and engineer door.

Write a review